Showing posts with label Maximus international. Show all posts
Showing posts with label Maximus international. Show all posts

Monday, March 31, 2014

Bookend Manufacturer

Bookend


bookend is an object that is designed to buttress, or support, an upright row of books. It is placed on either end to prevent books from falling over, such as in a half-filled bookshelf. Bookends are both utilitarian and, often, decorative. They are common in libraries and in homes. Heavy bookends have been used for centuries; the simple sheetmetal bookend was originally patented in the 1876 by William Stebbins Barnard,[1] and uses the weight of the books themselves to make an anchor.
Bookends can be an important consideration in home decor. Some bookends are made of bronze, marble, wood and even large geodes. Elaborate and decorative bookends are not uncommon. In libraries, simple metal brackets are often used to support the end of a row of books.
 

Tuesday, March 11, 2014

Porthole - Maximus International - www.replicartz.com - nautical gift manufacturer

Porthole

Maximus International - www.replicartz.com
porthole is a generally circular window used on the hull of ships to admit light and air. Though the term is of obvious maritime origin, it is also used to describe round windows on armored vehicles, aircraft, automobiles (the Ford Thunderbird a notable example) and even spacecraft.
On a ship, the function of a porthole, when open, is to permit light and fresh air to enter the dark and often damp below-deck quarters of the vessel. It also affords below-deck occupants a limited, but often much needed view to the outside world. When closed, the porthole provides a strong water-tight, weather-tight and sometimes light-tight barrier.
A porthole on a ship may also be called a sidescuttle or side scuttle (side hole), as officially termed in the International [1] It is also used in related rules and regulations for the construction of ships.[2] The use of the word "sidescuttle" instead of "porthole" is meant to be broad, including any covered or uncovered hole in the side of the vessel.
Convention for the Safety of Life at Sea. This term is used in the U.S. Code of Federal Regulations.




Structure

A porthole consists of at least two structural components and is, in its simplest form, similar to any other type of
window in design and purpose. The porthole is primarily a circular glass disk encased in a metal frame that is bolted securely into the side of a ship's hull. Sometimes the glass disk of a porthole is encased in a separate frame which is hinged onto the base frame so that it can be opened and closed. In addition, many portholes also have metal storm covers that can be securely fastened against the window when necessary. The main purpose of the storm cover is, as its name implies, to protect the window from heavy seas. It is also used to block light from entering lower berths when darkness is preferred. Storm covers are also used on Navy and merchant marine ships
to prevent interior light from escaping the ship's lower berths, and to provide protection from hostile fire. Hinged porthole windows and storm covers are accessible from inside the ship's hull, and are typically fastened to their closed positions by hand tightening several pivoting, threaded devices, commonly referred to as "dogs." Older portholes can be identified by the protruding collar of their base plate which may be up to several inches deep, thus accommodating the thickness of a wooden hull.
Portholes range in diameter from several inches to more than two feet, and weigh from several pounds to over one hundred pounds.
Much of the porthole's weight comes from its glass, which, on ships, can be as much as two inches thick. Metal components of a porthole are also typically very heavy; they are usually sand-cast and made of bronze, brass, steel, iron, or aluminium. Bronze and brass are most commonly used, favoured for their resistance to saltwater corrosion. The design of the porthole is such that it achieves its humble purposes without sacrificing the integrity of the ship's hull. The porthole's thick glass and rugged construction, tightly spaced fasteners, indeed even its round shape, all contribute to its purpose of maintaining hull strength and pressure of storm waves crashing against it.

Friday, February 28, 2014

Breastplate - www.replicartz.com

Armour Breast Plate 

Armour

In medieval weaponry, the breastplate is the front portion of plate armour covering the torso. It has been a military mainstay since ancient times and was usually made of leather, bronze or iron in antiquity. By around 1000 AD, solid plates had fallen out of use in Europe and knights of the period were wearing chain mail in the form of a hauberk over a padded tunic.[1] Plates protecting the torso reappeared during the 13th century in the form of the cuirass or alternatively as plates directly attached to a knightly garment known as the surcoat.[1] Around 1300 this developed into the Coat of Plates which continued to be in use for about a century.[1] True breastplates reappear in Europe in 1340 first composed of wrought iron and later of steel.They were between 1 mm and 2.5 mm strong.[2] In order to prevent the wearer from bring cut by their own armour, the design featured outward turned edges that also increased stiffness.[2] In some cases, further strength was added by a ridge running down through the centre of the plate.[2] These early breastplates only covered the upper torso with the lower torso not being protected by plate until the development of the fauld around 1400.[2] Around 1450, the breastplate had expanded to cover the entire torso and could consist of one or two plates.Bullet-proof vests are the modern descendant of the breastplate.













Live action role-playing game - LARP

Medieval Knight Crusader Helmet
A live action role-playing game (LARP) is a form of role-playing game where the participants physically act out their characters' actions. The players pursue goals within a fictional setting represented by the real world while interacting with each other in character. The outcome of player actions may be mediated by game rules or determined by consensus among players. Event arrangers called gamemasters decide the setting and rules to be used and facilitate play.
The first LARPs were run in the late 1970s, inspired by tabletop role-playing games and genre fiction. The activity spread internationally during the 1980s and has diversified into a wide variety of styles. Play may be very game-like or may be more concerned with dramatic or artistic expression. Events can also be designed to achieve educational or political goals. The fictional genres used vary greatly, from realistic modern or historical settings to fantastic or futuristic eras. Production values are sometimes minimal, but can involve elaborate venues and costumes. LARPs range in size from small private events lasting a few hours to large public events with thousands of players lasting for days.
Full Body Gothic armor

Terminology

LARP has also been referred to as live role-playing (LRP), interactive literature, and free form role-playing. Some of these terms are still in common use; however, LARP has become the most commonly accepted term.[1] It is sometimes written in lowercase, as larp.[2] The live action in LARP is analogous to the term live action used in film and video to differentiate works with human actors from animation. Playing a LARP is often calledlarping, and one who does it is a larper.

History

Gothic Gauntlets 15Th Century














Thursday, January 30, 2014

Diving helmet - Maximus International - www.replicartz.com

Diving helmets are worn mainly by professional divers engaged in surface supplied diving, though many models can be adapted for use with scuba equipment.
The helmet seals the whole of the diver's head from the water, allows the diver to see clearly underwater, provides the diver with breathing gas, protects the diver's head when doing heavy or dangerous work, and usually provides voice communications with the surface (and possibly other divers). If a helmeted diver becomes unconscious but is still breathing, the helmet will remain in place and continue to deliver breathing gas until the diver can berescued. In contrast, the scuba regulator typically used by recreational divers must be held in the mouth, otherwise it can fall out of an unconscious diver's mouth and result in drowning[2] (this does not apply to a full face mask which also continues to serve air if the diver is unconscious).
Before the invention of the demand regulator, all diving helmets used a free-flow design. Gas was delivered at a constant rate, regardless of the diver's breathing, and flowed out through an exhaust valve. Most modern helmets incorporate a demand valve so the helmet only delivers breathing gas when the diver inhales. Free-flow helmets use much larger quantities of gas than demand helmets, which can cause logistical difficulties and is very expensive when special breathing gases (such as heliox) are used. They also produce a constant noise inside the helmet, which can cause communication difficulties. Free-flow helmets are still preferred for hazardous materials diving, because their positive-pressure nature can prevent the ingress of hazardous material in case the integrity of the suit or helmet is compromised. They also remain relatively common in shallow-water air diving, where gas consumption is of little concern, and in nuclear diving because they must be disposed of after some period of use due to irradiation; free-flow helmets are significantly less expensive[citation needed] to purchase and maintain than demand types.
Most modern helmet designs are sealed at the neck using a neoprene "neck dam" which is independent of the suit, allowing the diver his choice of suits depending on the dive conditions. When a neck dam is installed into a drysuit, however, the entire body is isolated from the surrounding liquid, giving an additional degree of warmth and protection. When divers must work in hazardous environments such as sewage or dangerous chemicals, a helmet (usually of the free-flow type or using a series exhaust valve system) is sealed to a special drysuit (commonly made of a fabric with a smooth vulcanised rubber outer surface) to completely isolate and protect the diver. This equipment is the modern equivalent of the historic Mark V "Standard Diving Dress".

We at Maximus International india manufacture replica of diving helmets and many other nautical reproductions. 


Monday, January 27, 2014

Brunton compass

Brunton compass, properly known as the Brunton Pocket Transit, is a type of precision compass made by Brunton, Inc. of Riverton,Wyoming. The instrument was patented in 1894 by a Canadian-born Colorado geologist named David W. Brunton. Unlike most modern compasses, the Brunton Pocket Transit utilizes magnetic induction damping rather than fluid to damp needle oscillation. Although Brunton Inc. makes many other types of magnetic compasses, the Brunton Pocket Transit is a specialized instrument used widely by those needing to make accurate degree and angle measurements in the field. These people are primarily geologists, but archaeologists,environmental engineers, and surveyors also make use of the Brunton's capabilities. The United States Army has adopted the Pocket Transit as the M2 Compass for use by crew-served artillery also in nautical.
The Pocket Transit may be adjusted for declination angle according to one's location on the Earth. It is used to get directional degree measurements (azimuth) through use of the Earth's magnetic field. Holding the compass at waist-height, the user looks down into the mirror and lines up the target, needle, and guide line that is on the mirror. Once all three are lined up and the compass is level, the reading for that azimuth can be made. Arguably the most frequent use for the Brunton in the field is the calculation of the strike and dip ofgeological features (faults, contacts, foliation, sedimentary strata, etc.). If next to the feature, the strike is measured by leveling (with thebull's eye level) the compass along the plane being measured. Dip is taken by laying the side of the compass perpendicular to the strike measurement and rotating horizontal level until the bubble is stable and the reading has been made. If properly used and if field conditions allow, additional features of the compass allow users to measure such geological attributes from a distance.

And here at Maximus Inernational we are Manufacturer of compasses and other nautical maritime items based in india.

Saturday, January 25, 2014

Historical reenactment is a scripted educational or entertainment activity in which participants follow a prearranged plan to recreate aspects of a historical event or period—often a military engagement or display. This may be as narrow as a specific moment from a battle, such as the reenactment of Pickett's Charge presented during the Great Reunion of 1913, or as broad as an entire period, such as Regency reenactment or The 1920s Berlin Project.

Historical reenactment through the ages


Activities related to "reenactment" have a long history. The Romans staged recreations of famous battles within their amphitheaters as a form of public spectacle. In the Middle Agestournaments often reenacted historical themes from Ancient Rome or elsewhere. In the nineteenth century, reenactments were popular in a number of countries, e.g. the Eglinton Tournament of 1839 in Britain. During the early twentieth century they were popular in Russia with re-enactments of the Siege of Sevastopol (1854–1855) (1906), the Battle of Borodino (1812) in St Petersburg and the Taking of Azov (1696) in Voronezh in 1918. In 1920, there was a reenactment of the 1917Storming of the Winter Palace on the third anniversary of the event. This reenactment inspired the scenes in Sergei Eisenstein's filmOctober: Ten Days That Shook the World.
Likewise, mass pageants were used to commemorate civic events like the 150th anniversary of the founding of St Louis, held in 1914.[1] Particularly during and since the centennial of the American Civil War in the United States beginning in 1961, reenactments of Civil War battles has attracted many reenactors, who are some of the most dedicated.
We at maximus international manufacture a huge range of such items.











Wednesday, January 22, 2014

We at maximus international manufacturers  sextant of different types and techniques and here is a brief introduction of sextant below : 
sextant is an instrument used to measure the angle between any two visible objects. Its primary use is to determine the angle between a celestial object and the horizon which is known as the object's altitude. Using this measurement is known as sighting the object, shooting the object, or taking a sight and it is an essential part of celestial navigation. The angle, andposition line on a nautical or aeronautical chart. Common uses of the sextant include sighting the sun at solar noon and sighting Polaris at night (in the Northern Hemisphere), to find one's latitude. Sighting the height of a landmark can give a measure of distance off and, held horizontally, a sextant can measure angles between objects for a position on a chart.[1] A sextant can also be used to measure the lunar distance between the moon and another celestial object (e.g., star, planet) in order to determine Greenwich time which is important because it can then be used to determine the longitude.
the time when it was measured, can be used to calculate a
The scale of a sextant has a length of  of a turn (60°); hence the sextant's name (sextāns, -antis is the Latin word for "one sixth"). An octant is a similar device with a shorter scale ( turn, or 45°), where as a quintant ( turn, or 72°) and a quadrant (¼ turn, or 90°) have longer scales.
Sir Isaac Newton (1643–1727) invented the principle of the doubly reflecting navigation instrument (a reflecting quadrant—see Octant (instrument)), but never published it. Two men independently developed the octant around 1730: John Hadley (1682–1744), an English mathematician, and Thomas Godfrey (1704–1749), a glazier in PhiladelphiaJohn Bird made the first sextant in 1757. The octant and later the sextant, replaced the Davis quadrantas the main instrument for navigation.

Maximus International manufacturer suppliers & exporters.













About Us
Maximus International Specialists in Nautical Accessories, the Quality of the designed aesthetic pieces we procure, and provide, enhance and rejuvenating the space they hold. Captivating and mood inspiring, your home or office will always have a eye catching work of art to impress even the most objective of visitors. We put many years of our importing and business experience to offer you a fascinating range of nautical items, gifts and decor, fine replicas of antique brass telescopes, compasses and sextants, precisely working clocks, spot & search lights, lamps, cargo lanterns,  armour helmets, greek armoury, roman armoury, medieval armoury, ancient armoury and more. These unique and attractive antiques bring a historical elegance to any room or space and is very fashionable. Items like nautical clocks, captain bells, etc. will make great desk or home decoration, and are excellent as gifts for like minded enthusiasts.

At Maximus International we leave no stone unturned to fill the needs of our clients. Our aim is to help both local and overseas customers do their antique browsing and shopping from the comfort of their own home. A user-friendly e-commerce interface, highly experienced manufacturing vendors and agile warehouse systems are just some of the features we have roped in for the convenience of our customers.We always strive to deliver best customer service such that you wouldn’t resist visiting us again sooner All our replica products are reasonably priced. We are passionate about our business and therefore passionate about helping you find that treasured antique that will compliment your home decoration or add to the discerning collectors unique range. Contact us to discuss any of our online products.
We can also develop any new product which is part of your dream and imagination provided you give us clues about it with the help of ideas, sketches or photographs. The products are manufactured with utmost care to infuse them with the best strength and appearance. The fantastic products are then packed in the most trendy and safest way so that our dear customers can use and cherish them for whole life. Apart from these, resolving the doubts and difficulties is also the parallel objective of our skilled workforce. We are a prominent company in the industry sector. Your dreams braid with our dreams!